Steps to fix Canon printer error code 5b02?

If the waste ink absorber on your Canon MG 3520 printer becomes full, you may face Canon printer error code 5b02. In addition, if the Canon printer is unable to recognize the sponge absorber, an error code will show, stopping you from further accessing the device. You may see this problem from time to time due to internal issues. If this error code occurs on the LED display, you must resolve it as soon as possible. Fortunately, we shall offer efficient approaches that will undoubtedly aid you in overcoming the difficulty.

Methods to fix Canon Error Code 5b02:-

As we are now completely aware of the causes of this problem, we can proceed to the troubleshooting methods to resolve it. Keep in mind that all of the processes must be completed correctly and precisely. To achieve the finest resolution, do not skip or modify any steps. So, here are some solutions you may attempt to resolve issue number 5b02.

Method 1: Reset Your Canon Printer

The first thing you should attempt to repair this problem is to reset your Canon printer. SO, to do this approach, carefully follow all of the instructions listed below:

The first step is to unhook the printer's and the power source's power cords.
Remove all of the printer's connected connections, including the USB wires (if attached).
Hold down the Start button.
Now reconnect the Canon Printer.
Hold down the Start button while pressing the Resume button twice.
Re-enact the first and second stages.
After completing the preceding procedures, press and hold the Resume button four to four times.
Once done with this, check if the issue has been fixed or not.

If in case the issue has not been fixed. Then you can move on to the second method to get this error code fixed.

Method 2: Utilize Service Tool

This is the second technique you might try to resolve the problem. However, before beginning this approach, ensure that your Canon Printer has enough paper loaded. To perform this procedure, be careful to follow the instructions outlined below.

The first step is to choose a region. This is done by enlarging the drop-down list and selecting your area.
Set of chicks.
Set it now. Tap on Clear Ink Counter > Dropdown menu > Main Black > Set to print one sheet.
Open the Ink Absorber Counter, then select Absorber from the drop-down menu.
After that, click on Main Black and then select the Set option. This will allow the printer to begin printing from one sheet to the next.
Now choose EEPROM.
Go to Service Tool > Auto > Test Print.

After you've completed all of the instructions, restart your Canon printer and wait a few seconds before turning it on. Once you've logged in, try running a print test to see whether the problem has been addressed.

We hope this post was useful and that you were able to address your issue by following all of the procedures outlined in this blog. These are tried-and-true methods for resolving Canon Printer Error Code 5b02. This mistake may be corrected by carefully following all of these instructions.